Z-ZN 6” Series
Multi-stage centrifugal submersible pumps for clean water in 6” wells.
Applications:
- Water supply
- Pressure boosting
- Irrigation
- Fire-fighting
- Mining industry
- Golf
- Ground water level control
Made of AISI 304 or AISI 316 stainless steel
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management
Their main characteristics include the possibility of replacing the impeller inlet wear ring
Available in the high-pressure version to guarantee heads of up to 700 m
Can be coupled to all NEMA-standard motorsSpecifications
Delivery: up to 78 m3/h
Head: up to 700 m (high-pressure version)
Power supply: three-phase 50-60 Hz
Three-phase version: 380V-415V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W, and L8W three-phase asynchronous motors in a coolant bath
Maximum overall diameter of pump (two cable covers included): 144 mm (standard version); 195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Materials
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM
Z-ZN 6” Series
Multi-stage centrifugal submersible pumps for clean water in 6” wells.
Applications:
- Water supply
- Pressure boosting
- Irrigation
- Fire-fighting
- Mining industry
- Golf
- Ground water level control
Made of AISI 304 or AISI 316 stainless steel
These durable and lightweight pumps assure high-efficiency, low maintenance costs and ease of management
Their main characteristics include the possibility of replacing the impeller inlet wear ring
Available in the high-pressure version to guarantee heads of up to 700 m
Can be coupled to all NEMA-standard motorsSpecifications
Delivery: up to 78 m3/h
Head: up to 700 m (high-pressure version)
Power supply: three-phase 50-60 Hz
Three-phase version: 380V-415V
Power: 0.55 kW to 55 kW
Can be coupled with L4C, L6W, and L8W three-phase asynchronous motors in a coolant bath
Maximum overall diameter of pump (two cable covers included): 144 mm (standard version); 195 mm (high-pressure version)
Water temperature: 0°C to +60°C (depending on the limits of the associated motor)
Maximum permissible quantity of suspended sand: 100 g/m3
Materials
Delivery port, non-return valve, diffuser, impeller, cable cover, lower support, pump shaft, coupling, spacer, screws, tie-rods: Stainless steel
Thrust bearing: PTFE
Wear ring: Technopolymer PPO
Upper bearing: tungsten carbide
Shaft guide bearing: polyurethane
Elastomers: EPDM